Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Port Plate: 1 inch (25mm) with Glass

Reflectance Sample Shelf with Light Cover

B02-1005-172
For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Semi-Micro Powder Holder

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Port Plate, 4 mm Round

Port Plate: 1 inch (25mm) with Glass

Reflectance Sample Shelf with Light Cover

B02-1005-172
For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Semi-Micro Powder Holder

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Port Plate, 4 mm Round

Port Plate: 1 inch (25mm) with Glass

Reflectance Sample Shelf with Light Cover

B02-1005-172
For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Semi-Micro Powder Holder

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

External Printer Kit

L01-1010-678
External Printer Kit, 110V
Includes one spare ribbon, one spare roll paper and cable

Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

Capsule Shaped Port Insert

Footswitch Assembly

Glass Sample Cup, 2.5 inch (64 mm)

Port Insert for Glass Sample Cup

A02-1010-316
The use of the sample cup enables the measurement of powders, granules, pellets, pastes and liquids. The port insert is designed to hold the sample cup in proper position at the measuring port.

04-7209-00
Glass Sample Cup, 2.5 inch (64mm)

Port Insert with Glass

Port Inserts with glass
Protects the instrument from sample and airborne particles.

A02-1010-320
Port Insert, 44mm (1.75 inch) with glass

A02-1010-319
Port Insert, 25mm (1.00 inch) with glass

A02-1010-318
Port Insert, 13mm (0.50 inch) with glass

A02-1010-317
Port Insert, 6mm (0.25 inch) with glass

Semi-Micro Powder Holder

External Printer Kit

L01-1010-678
External Printer Kit, 110V
Includes one spare ribbon, one spare roll paper and cable

Footswitch Assembly

Glass Sample Cup, 2.5 inch (64 mm)

Hard-Sided Carrying Case

Port Insert

Port Inserts
04-6623-10
1.25 inch (32mm) (45°/0° only)

02-6624-05
1.25 inch (32mm) with glass (45°/0° only)

D02-1010-618
1.25 inch (32mm) with 420nm UV Filter Assembly (45°/0°)

04-6623-09
1 inch (25mm) (45°/0° only)

02-6624-01
1 inch (25mm) with glass (45°/0° only)

04-6623-08
0.75 inch (19mm) (45°/0° only)

04-6623-05
0.5 inch (13mm) (45°/0° only)

04-6622-00
Port Insert for Sample Cup
2.5 inch (64mm, 45°/0° only) The use of the sample cup enables the measurement of powders, granules, pellets, pastes and liquids. The port insert is designed to hold the sample cup in proper position at the measuring port.

Sample Cup Opaque Cover