Accessories for Food Industry

  • MiniScan EZ for Food Industry

    • 45°/0° LAV Nose Cone with Polycarbonate Window

      45°/0° LAV Nose Cone with Polycarbonate Window

      B02-1009-550
      45°/0° LAV Nose Cone with Polycarbonate Window

      B02-1011-350
      45°/0° LAV Replacement Polycarbonate Window
      For use with PN B02-1009-550

      A02-1002-129
      45°/0° LAV Nose Cone with Glass Window

      A02-1002-137
      45°/0° LAV Replacement Glass Window
      For use with PN A02-1002-129

      A02-1009-954
      45°/0° LAV 420 nm UV Filter Window
      For use with PN A02-1002-129

       

    • Bar Code Scanner

      Bar Code Scanner A13-1014-254
      Bar Code Scanner
       

    • External Printer

      External Printer A13-1014-259
      External Printer
       
     

  • UltraScan PRO for Food Industry

    • Adjustable Transmission Preform Holder

      Adjustable Transmission Preform Holder D02-1011-833
      Measure preforms with shaft diameter from 10 mm to 40 mm. The length of that straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
       

    • Flow-Through Cell Holder

      Flow-Through Cell Holder

      D02-1009-960
      Transmission Cell Holder
      Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
      C04-1001-960 (50 mm)
      C04-1001-959 (20 mm)
      C04-1001-958 (10mm)

      Flow-Through Cell
      Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

       

    • Footswitch Assembly

      Footswitch Assembly D02-1010-327
      The footswitch is used to initiate sample measurement without the use of hands.
       

    • Holder of Round, Capped Cell

      Holder of Round, Capped Cell

      D02-1011-886
      Holder of Round, Capped Cell
      Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

      A13-1011-613
      Round, Capped Cell
      A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

       

    • Port Plate: 1 inch (25mm) with Glass

      Port Plate: 1 inch (25mm) with Glass A02-1011-124
       

    • Reflectance Sample Shelf with Light Cover

      Reflectance Sample Shelf with Light Cover

      B02-1005-172
      For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

       

    • Semi-Micro Powder Holder

      Semi-Micro Powder Holder D02-1012-931
      Permits the reflected color measurement of as little as 0.4 cc of packed powder.
      Powder is placed in the powder holder and is backed with the white plunger.
       

    • Transmission Cell Holder

      Transmission Cell Holder

      C02-1005-481
      Transmission Cell Holder
      Permits transmittance measurement of liquids in Transmission cell.
      13-8573-20 (50 mm)
      B04-1003-801 (33 mm)
      04-4592-00 (20 mm)
      13-8573-40 (10 mm)

       

    • Transmission Holder for 10-mm Plastic Cell

      Transmission Holder for 10-mm Plastic Cell CMR2987
      Provides consistent placement of a disposable, 10-mm path length (32.5 mm wide), plastic transmission cell on the Transmission Cell Holder (included). Disposable cells can be ordered from Lumelite Plastics as part # 24022642.
       

    • Transmission Holder for 27-30 mm Tubes

      Transmission Holder for 27-30 mm Tubes D02-1011-550
       

    • Transmission Spill Tray and Cell Holder

      Transmission Spill Tray and Cell Holder D02-1011-568 Permits transmittance measurement of liquids using rectangular transmission cell (above). Cells purchased separately.
       
     

  • UltraScan VIS for Food Industry

    • Adjustable Reflectance Preform Holder

      Adjustable Reflectance Preform Holder D02-1011-841
      Measures preforms with shaft diameter from 15 mm to 40 mm. The length of the straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
       

    • Adjustable Transmission Preform Holder

      Adjustable Transmission Preform Holder D02-1011-833
      Measure preforms with shaft diameter from 10 mm to 40 mm. The length of that straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
       

    • Flow-Through Cell Holder

      Flow-Through Cell Holder

      D02-1009-960
      Transmission Cell Holder
      Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
      C04-1001-960 (50 mm)
      C04-1001-959 (20 mm)
      C04-1001-958 (10mm)

      Flow-Through Cell
      Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

       

    • Footswitch Assembly

      Footswitch Assembly D02-1010-327
      The footswitch is used to initiate sample measurement without the use of hands.
       

    • Holder of Round, Capped Cell

      Holder of Round, Capped Cell

      D02-1011-886
      Holder of Round, Capped Cell
      Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

      A13-1011-613
      Round, Capped Cell
      A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

       

    • Port Plate, 4 mm Round

      Port Plate, 4 mm Round A02-1011-184
       

    • Port Plate: 1 inch (25mm) with Glass

      Port Plate: 1 inch (25mm) with Glass A02-1011-124
       

    • Reflectance Sample Shelf with Light Cover

      Reflectance Sample Shelf with Light Cover

      B02-1005-172
      For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

       

    • Semi-Micro Powder Holder

      Semi-Micro Powder Holder D02-1012-313
      Permits the reflected color measurement of as little as 0.4 cc of packed powder.
      Powder is placed in the powder holder and is backed with the white plunger.
       

    • Transmission Cell Holder

      Transmission Cell Holder

      C02-1005-481
      Transmission Cell Holder
      Permits transmittance measurement of liquids in Transmission cell.
      13-8573-20 (50 mm)
      B04-1003-801 (33 mm)
      04-4592-00 (20 mm)
      13-8573-40 (10 mm)

       

    • Transmission Holder for 10-mm Plastic Cell

      Transmission Holder for 10-mm Plastic Cell CMR2987
      Provides consistent placement of a disposable, 10-mm path length (32.5 mm wide), plastic transmission cell on the Transmission Cell Holder (included). Disposable cells can be ordered from Lumelite Plastics as part # 24022642.
       

    • Transmission Holder for 27-30 mm Tubes

      Transmission Holder for 27-30 mm Tubes D02-1011-550
       

    • Transmission Spill Tray and Cell Holder

      Transmission Spill Tray and Cell Holder D02-1011-568 Permits transmittance measurement of liquids using rectangular transmission cell (above). Cells purchased separately.
       
     

  • ColorQuest XE for Food Industry

    • Adjustable Reflectance Preform Holder

      Adjustable Reflectance Preform Holder D02-1011-841
      Measures preforms with shaft diameter from 15 mm to 40 mm. The length of the straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
       

    • Adjustable Transmission Preform Holder

      Adjustable Transmission Preform Holder D02-1011-833
      Measure preforms with shaft diameter from 10 mm to 40 mm. The length of that straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
       

    • Flow-Through Cell Holder

      Flow-Through Cell Holder

      D02-1009-960
      Transmission Cell Holder
      Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
      C04-1001-960 (50 mm)
      C04-1001-959 (20 mm)
      C04-1001-958 (10mm)

      Flow-Through Cell
      Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

       

    • Footswitch Assembly

      Footswitch Assembly D02-1010-327
      The footswitch is used to initiate sample measurement without the use of hands.
       

    • Holder of Round, Capped Cell

      Holder of Round, Capped Cell

      D02-1011-886
      Holder of Round, Capped Cell
      Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

      A13-1011-613
      Round, Capped Cell
      A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

       

    • Port Plate, 4 mm Round

      Port Plate, 4 mm Round A02-1011-184
       

    • Port Plate: 1 inch (25mm) with Glass

      Port Plate: 1 inch (25mm) with Glass A02-1011-124
       

    • Reflectance Sample Shelf with Light Cover

      Reflectance Sample Shelf with Light Cover

      B02-1005-172
      For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

       

    • Semi-Micro Powder Holder

      Semi-Micro Powder Holder D02-1012-313
      Permits the reflected color measurement of as little as 0.4 cc of packed powder.
      Powder is placed in the powder holder and is backed with the white plunger.
       

    • Transmission Cell Holder

      Transmission Cell Holder

      C02-1005-481
      Transmission Cell Holder
      Permits transmittance measurement of liquids in Transmission cell.
      13-8573-20 (50 mm)
      B04-1003-801 (33 mm)
      04-4592-00 (20 mm)
      13-8573-40 (10 mm)

       

    • Transmission Holder for 10-mm Plastic Cell

      Transmission Holder for 10-mm Plastic Cell CMR2987
      Provides consistent placement of a disposable, 10-mm path length (32.5 mm wide), plastic transmission cell on the Transmission Cell Holder (included). Disposable cells can be ordered from Lumelite Plastics as part # 24022642.
       

    • Transmission Holder for 27-30 mm Tubes

      Transmission Holder for 27-30 mm Tubes D02-1011-550
       

    • Transmission Spill Tray and Cell Holder

      Transmission Spill Tray and Cell Holder D02-1011-568 Permits transmittance measurement of liquids using rectangular transmission cell (above). Cells purchased separately.
       
     

  • ColorQuest XT for Food Industry

    • Adjustable Transmission Preform Holder

      Adjustable Transmission Preform Holder D02-1011-833
      Measure preforms with shaft diameter from 10 mm to 40 mm. The length of that straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
       

    • External Printer Kit

      External Printer Kit

      L01-1010-678
      External Printer Kit, 110V
      Includes one spare ribbon, one spare roll paper and cable

      L01-1010-679
      External Printer Kit, 220V
      Includes one spare ribbon, one spare roll paper and cable
       

    • Flow-Through Cell Holder

      Flow-Through Cell Holder

      D02-1009-960
      Transmission Cell Holder
      Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
      C04-1001-960 (50 mm)
      C04-1001-959 (20 mm)
      C04-1001-958 (10mm)

      Flow-Through Cell
      Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

       

    • Footswitch Assembly

      Footswitch Assembly D02-1010-327
      The footswitch is used to initiate sample measurement without the use of hands.
       

    • Holder of Round, Capped Cell

      Holder of Round, Capped Cell

      D02-1011-886
      Holder of Round, Capped Cell
      Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

      A13-1011-613
      Round, Capped Cell
      A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

       

    • Transmission Cell Holder

      Transmission Cell Holder

      C02-1005-481
      Transmission Cell Holder
      Permits transmittance measurement of liquids in Transmission cell.
      13-8573-20 (50 mm)
      B04-1003-801 (33 mm)
      04-4592-00 (20 mm)
      13-8573-40 (10 mm)

       

    • Transmission Holder for 10-mm Plastic Cell

      Transmission Holder for 10-mm Plastic Cell CMR2987
      Provides consistent placement of a disposable, 10-mm path length (32.5 mm wide), plastic transmission cell on the Transmission Cell Holder (included). Disposable cells can be ordered from Lumelite Plastics as part # 24022642.
       

    • Transmission Holder for 27-30 mm Tubes

      Transmission Holder for 27-30 mm Tubes D02-1011-550
       

    • Transmission Spill Tray and Cell Holder

      Transmission Spill Tray and Cell Holder D02-1011-568 Permits transmittance measurement of liquids using rectangular transmission cell (above). Cells purchased separately.
       
     

  • LabScan XE for Food Industry

    • Footswitch Assembly

      Footswitch Assembly D02-1010-327
      The footswitch is used to initiate sample measurement without the use of hands.
       

    • Glass Sample Cup, 2.5 inch (64 mm)

      Glass Sample Cup, 2.5 inch (64 mm) 04-7209-00
       

    • Port Insert for Glass Sample Cup

      Port Insert for Glass Sample Cup

      A02-1010-316
      The use of the sample cup enables the measurement of powders, granules, pellets, pastes and liquids. The port insert is designed to hold the sample cup in proper position at the measuring port.

      04-7209-00
      Glass Sample Cup, 2.5 inch (64mm)

       

    • Port Insert with Glass

      Port Insert with Glass

      Port Inserts with glass
      Protects the instrument from sample and airborne particles.

      A02-1010-320
      Port Insert, 44mm (1.75 inch) with glass

      A02-1010-319
      Port Insert, 25mm (1.00 inch) with glass

      A02-1010-318
      Port Insert, 13mm (0.50 inch) with glass

      A02-1010-317
      Port Insert, 6mm (0.25 inch) with glass

       

    • Port-Down Stand

      Port-Down Stand D02-1009-350
      Permits port-down mounting of the sensor. Includes an adjustable arm assembly with clamp.
       

    • Sample Clamp

      Sample Clamp D02-1009-200
      Holds samples securely at the sample port for measuring with the instrument in the port-forward orientation. Includes interchangeable white and black backing plate.
       

    • Sample Cup Set for Translucent Liquids

      Sample Cup Set for Translucent Liquids

      LSXE-SC-ASSY
      This set permits the measurement of transparent or translucent liquids and semi-solids. The ring and ceramic disk are used to fix the path length for transflectance measurement.
      Includes a Port Insert for Glass Sample Cup, a Glass Sample Cup, Ring and Disk Set, and Sample Cup Opaque Cover.

      A02-1010-316
      Port Insert for Glass Sample Cup

      04-7209-00
      Glass Sample Cup, 2.5 inch (64mm)

      02-4579-00
      Ring and Disk Set

      04-4000-00
      Sample Cup Opaque Cover

       

    • Semi-Micro Powder Holder

      Semi-Micro Powder Holder CMR 2439
       
     

  • D25LT for Food Industry

    • D25LT External Printer

      D25LT External Printer L02-1013-427 External printer with USB input.
       

    • Glass Cover (Port Up)

      Glass Cover (Port Up) 12-0001-20
      A 4-inch (10.2-cm) square cover glass to prevent dust and sample material from contaminating the inside of the sensor.
       

    • Glass Sample Cup, 5 inch (Port Up)

      Glass Sample Cup, 5 inch (Port Up) 04-7767-00
      A 5-inch (12.7-cm) sample cup that is ideal for the analysis of large granular products and foods.
       

    • Sample Dish (Port Down)

      Sample Dish (Port Down) D04-1013-402 Anodized aluminum dish, 7 inch (17.8cm) diameter, used with port down sample presenter.
       

    • Sample Dish Assembly and Polycarbonate Sensor Window (Port Up)

      Sample Dish Assembly and Polycarbonate Sensor Window (Port Up)

      L02-1013-431
      Sample Dish Assembly and Polycarbonate Sensor Window
      Provides an anodized aluminum sample dish with polycarbonate bottom, a lid for the sample dish, a polycarbonate sensor port window (not shown), and a black light trap to be used in place of the black glass instrument standard.

      L02-1008-437
      Sample Dish with Polycarbonate Bottom
      Round, 7 inch (17.8cm) diameter, anodized aluminum sample dish with polycarbonate bottom. One included with L02-1013-431.
      A04-1001-308 Polycarbonate bottom (replacement)

      L02-1008-436
      Sample Dish with Glass Bottom
      Round, 7 inch (17.8cm) diameter, anodized aluminum sample dish with glass bottom. Glass bottom is more scratch resistant than polycarbonate, but can not be used in food processing areas.
      A04-1002-920 Glass bottom (replacement)

      L02-1008-435
      Lid for Sample Dish
      Round lid, with handle, used to cover sample dish. One included with L02-1013-431.

      A02-1002-965
      Light Trap
      A round, black light trap, that is to be used in place of the black glass instrument standard when using sample dishes. One included with L02-1013-431.

      D02-1013-291
      Measurement Port Polycarbonate Window
      A polycarbonate window that can be mounted in the D25LT measurement port. Prevents dust and sample material from contaminating the inside of the sensor. One included with L02-1013-431.

       

    • Sample Dish with Mount for a Petri Dish (Port Down)

      Sample Dish with Mount for a Petri Dish (Port Down) D04-1013-411
      Anodized aluminum dish, 7-inch (17.8-cm) diameter, with positioning holder to support a petri dish. Used for measuring powders, granules and flakes, such as spices.
       

    • USB 2.0 Flash Drive, 256MB

      A10-1013-423
      USB 2.0 Flash Drive, 256MB
      Enables software updates, data transfer and driver installations.

       

    • USB 2.0 Port Hub

      A10-1013-424
      USB 2.0 Port Hub
      Provides 4 USB ports for connection with other USB supported hardware.

       

    • USB-To-Serial Adapter

      A10-1011-777
      USB-To-Serial Adapter

       
     

  • ColorFlex for Food Industry

    • External Printer Kit

      External Printer Kit

      L01-1010-678
      External Printer Kit, 110V
      Includes one spare ribbon, one spare roll paper and cable

      L01-1010-679
      External Printer Kit, 220V
      Includes one spare ribbon, one spare roll paper and cable
       

    • Footswitch Assembly

      Footswitch Assembly D02-1010-327
      The footswitch is used to initiate sample measurement without the use of hands.
       

    • Glass Sample Cup, 2.5 inch (64 mm)

      Glass Sample Cup, 2.5 inch (64 mm) 04-7209-00
       

    • Hard-Sided Carrying Case

      Hard-Sided Carrying Case D02-1010-619
       

    • Port Insert

      Port Insert

      Port Inserts
      04-6623-10
      1.25 inch (32mm) (45°/0° only)

      02-6624-05
      1.25 inch (32mm) with glass (45°/0° only)

      D02-1010-618
      1.25 inch (32mm) with 420nm UV Filter Assembly (45°/0°)

      04-6623-09
      1 inch (25mm) (45°/0° only)

      02-6624-01
      1 inch (25mm) with glass (45°/0° only)

      04-6623-08
      0.75 inch (19mm) (45°/0° only)

      04-6623-05
      0.5 inch (13mm) (45°/0° only)

      04-6622-00
      Port Insert for Sample Cup
      2.5 inch (64mm, 45°/0° only) The use of the sample cup enables the measurement of powders, granules, pellets, pastes and liquids. The port insert is designed to hold the sample cup in proper position at the measuring port.

       

    • Ring and Disk Set

      Ring and Disk Set

      02-4579-00
      For use in the glass sample cup, used for transparent and translucent liquids on semi-solids where path length must be fixed. Does not include sample cup.

       

    • Sample Cup Opaque Cover

      Sample Cup Opaque Cover 04-4000-00
      Provides a light trap to exclude the interference of external light on the sample cup.