45°/0° LAV Nose Cone with Polycarbonate Window

B02-1009-550
45°/0° LAV Nose Cone with Polycarbonate Window

B02-1011-350
45°/0° LAV Replacement Polycarbonate Window
For use with PN B02-1009-550

A02-1002-129
45°/0° LAV Nose Cone with Glass Window

A02-1002-137
45°/0° LAV Replacement Glass Window
For use with PN A02-1002-129

A02-1009-954
45°/0° LAV 420 nm UV Filter Window
For use with PN A02-1002-129

Bar Code Scanner

External Printer

Skein Holder

Adjustable Transmission Preform Holder

Compression Clamp Kit

L02-1012-387
Used for compressing fibers into a compact mass to permit repeatable color analysis. Includes a pneumatically driven compression clamp, port plate cup holder and a 2.5 inch (64 mm) glass sample cup.

Compression Clamp
D02-1008-987
Pneumatically driven compression clamp only. Can be used with Port Plate with glass.

Port Plate: Cup Holder
D02-1012-386
Consists of port plate holder for 2.5 inch sample cup.

Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Insulated Transmission Cell Holder for Hot Liquids

Port Plate: 1 inch (25mm) with Glass

Reflectance Sample Shelf with Light Cover

B02-1005-172
For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Semi-Micro Powder Holder

Skein Holder

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Clamp

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

Adjustable Reflectance Preform Holder

Adjustable Transmission Preform Holder

Compression Clamp Kit

D02-1011-131
Compression Clamp Kit
Used for compressing fibers into a compact mass to permit repeatable color analysis. Includes a pneumatically driven compression clamp, port plate cup holder and a 2.5 inch (64mm) glass sample cup.

04-7209-00
Glass Sample Cup, 2.5 inch (64mm)

D02-1011-132
Compression Clamp
Pneumatically driven compression clamp only. Can be used with Port Plate with glass.

D02-1012-386
Port Plate: Cup Holder
Consists of port plate holder for 2.5 inch sample cup.

Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Insulated Transmission Cell Holder for Hot Liquids

Port Plate, 4 mm Round

Port Plate: 1 inch (25mm) with Glass

Reflectance Sample Shelf with Light Cover

B02-1005-172
For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Semi-Micro Powder Holder

Skein Holder

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Clamp

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

Adjustable Reflectance Preform Holder

Adjustable Transmission Preform Holder

Compression Clamp Kit

D02-1011-131
Compression Clamp Kit
Used for compressing fibers into a compact mass to permit repeatable color analysis. Includes a pneumatically driven compression clamp, port plate cup holder and a 2.5 inch (64mm) glass sample cup.

04-7209-00
Glass Sample Cup, 2.5 inch (64mm)

D02-1011-132
Compression Clamp
Pneumatically driven compression clamp only. Can be used with Port Plate with glass.

D02-1012-386
Port Plate: Cup Holder
Consists of port plate holder for 2.5 inch sample cup.

Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Insulated Transmission Cell Holder for Hot Liquids

Port Plate, 4 mm Round

Port Plate: 1 inch (25mm) with Glass

Reflectance Sample Shelf with Light Cover

B02-1005-172
For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Semi-Micro Powder Holder

Skein Holder

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Clamp

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

Adjustable Transmission Preform Holder

External Printer Kit

L01-1010-678
External Printer Kit, 110V
Includes one spare ribbon, one spare roll paper and cable

Flow-Through Cell Holder

D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)

Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.

Footswitch Assembly

Holder of Round, Capped Cell

D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.

A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.

Insulated Transmission Cell Holder for Hot Liquids

Semi-Micro Cell Holder and Optical Assembly

L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.

The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.

Transmission Cell Holder

C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)

Transmission Clamp

Transmission Holder for 10-mm Plastic Cell

Transmission Holder for 27-30 mm Tubes

Transmission Spill Tray and Cell Holder

Capsule Shaped Port Insert

Compression Cell Set

LSXE-COMP
Used to compress fibers into a compact mass to permit repeatable color analysis. Includes a pneumatically driven compression assembly, port insert cup holder and a 64 mm (2.5 inch) glass sample cup.

04-7209-00
Glass Sample Cup, 2.5 inch (64mm)

Footswitch Assembly

Glass Sample Cup, 2.5 inch (64 mm)

Port Insert for Glass Sample Cup

A02-1010-316
The use of the sample cup enables the measurement of powders, granules, pellets, pastes and liquids. The port insert is designed to hold the sample cup in proper position at the measuring port.

04-7209-00
Glass Sample Cup, 2.5 inch (64mm)

Port Insert with Glass

Port Inserts with glass
Protects the instrument from sample and airborne particles.

A02-1010-320
Port Insert, 44mm (1.75 inch) with glass

A02-1010-319
Port Insert, 25mm (1.00 inch) with glass

A02-1010-318
Port Insert, 13mm (0.50 inch) with glass

A02-1010-317
Port Insert, 6mm (0.25 inch) with glass

Port-Down Stand

Sample Clamp

Semi-Micro Powder Holder

Skein Holder

D25LT External Printer

Glass Cover (Port Up)

Glass Sample Cup, 5 inch (Port Up)

Sample Dish (Port Down)

Sample Dish Assembly and Polycarbonate Sensor Window (Port Up)

L02-1013-431
Sample Dish Assembly and Polycarbonate Sensor Window
Provides an anodized aluminum sample dish with polycarbonate bottom, a lid for the sample dish, a polycarbonate sensor port window (not shown), and a black light trap to be used in place of the black glass instrument standard.

L02-1008-437
Sample Dish with Polycarbonate Bottom
Round, 7 inch (17.8cm) diameter, anodized aluminum sample dish with polycarbonate bottom. One included with L02-1013-431.
A04-1001-308 Polycarbonate bottom (replacement)

L02-1008-436
Sample Dish with Glass Bottom
Round, 7 inch (17.8cm) diameter, anodized aluminum sample dish with glass bottom. Glass bottom is more scratch resistant than polycarbonate, but can not be used in food processing areas.
A04-1002-920 Glass bottom (replacement)

L02-1008-435
Lid for Sample Dish
Round lid, with handle, used to cover sample dish. One included with L02-1013-431.

A02-1002-965
Light Trap
A round, black light trap, that is to be used in place of the black glass instrument standard when using sample dishes. One included with L02-1013-431.

D02-1013-291
Measurement Port Polycarbonate Window
A polycarbonate window that can be mounted in the D25LT measurement port. Prevents dust and sample material from contaminating the inside of the sensor. One included with L02-1013-431.

Sample Dish with Mount for a Petri Dish (Port Down)

USB 2.0 Flash Drive, 256MB

A10-1013-423
USB 2.0 Flash Drive, 256MB
Enables software updates, data transfer and driver installations.

USB 2.0 Port Hub

A10-1013-424
USB 2.0 Port Hub
Provides 4 USB ports for connection with other USB supported hardware.

USB-To-Serial Adapter

A10-1011-777
USB-To-Serial Adapter

External Printer Kit

L01-1010-678
External Printer Kit, 110V
Includes one spare ribbon, one spare roll paper and cable

Footswitch Assembly

Glass Sample Cup, 2.5 inch (64 mm)

Hard-Sided Carrying Case

Port Insert

Port Inserts
04-6623-10
1.25 inch (32mm) (45°/0° only)

02-6624-05
1.25 inch (32mm) with glass (45°/0° only)

D02-1010-618
1.25 inch (32mm) with 420nm UV Filter Assembly (45°/0°)

04-6623-09
1 inch (25mm) (45°/0° only)

02-6624-01
1 inch (25mm) with glass (45°/0° only)

04-6623-08
0.75 inch (19mm) (45°/0° only)

04-6623-05
0.5 inch (13mm) (45°/0° only)

04-6622-00
Port Insert for Sample Cup
2.5 inch (64mm, 45°/0° only) The use of the sample cup enables the measurement of powders, granules, pellets, pastes and liquids. The port insert is designed to hold the sample cup in proper position at the measuring port.

Ring and Disk Set

02-4579-00
For use in the glass sample cup, used for transparent and translucent liquids on semi-solids where path length must be fixed. Does not include sample cup.

Sample Clamp and Port Forward Stand

Sample Cup Opaque Cover

Skein Holder