Accessory Brochure (PDF)
D02-1011-841
Measures preforms with shaft diameter from 15 mm to 40 mm. The length of the straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
D02-1011-833
Measure preforms with shaft diameter from 10 mm to 40 mm. The length of that straight shaft above the preform threads should be at least 50 mm in order to completely cover the port.
D02-1011-131
Compression Clamp Kit
Used for compressing fibers into a compact mass to permit repeatable color analysis. Includes a pneumatically driven compression clamp, port plate cup holder and a 2.5 inch (64mm) glass sample cup.
04-7209-00
Glass Sample Cup, 2.5 inch (64mm)
D02-1011-132
Compression Clamp
Pneumatically driven compression clamp only. Can be used with Port Plate with glass.
D02-1012-386
Port Plate: Cup Holder
Consists of port plate holder for 2.5 inch sample cup.
D02-1009-960
Transmission Cell Holder
Provides a cell holder that can be mounted in the transmission compartment for supporting a flow cell.
C04-1001-960 (50 mm)
C04-1001-959 (20 mm)
C04-1001-958 (10mm)
Flow-Through Cell
Provides a 2 inch (51mm) diameter optically clear flow-through glass cell with a path length of 50 mm, 20 mm, or 10 mm.
D02-1010-327
The footswitch is used to initiate sample measurement without the use of hands.
D02-1011-886
Holder of Round, Capped Cell
Provides a cell holder that is mounted in the transmission compartment for supporting the round, capped cell. Cell purchased separately.
A13-1011-613
Round, Capped Cell
A round, screw capped, optically clear transmission cell with 10 mm path length and 4.0 mL volume. Cell includes both a solid propylene cap and inject-a-cell cap. For use with above Holder for Round Capped Cell.
CMR 2608
B04-1002-672
Tall Transmission Cell
A02-1011-184
A02-1011-124
B02-1005-172
For the reflectance measurement of powders, granules and semi-solids held in a rectangular cell. Cells purchased separately.
L02-1012-202
Enables the use of 10 mm and 20 mm path length standard or semi-micro analytical cells for color transmission measurement of small volumes of clear liquids. Glass or plastic cells are purchased separately by the customer. Approximate sample volumes required when using semi-micro cells are 0.4 mL for 10 mm path length and 0.8 mL for 20 mm path length.
The thick walled cells (having 4 mm internal width) are available from NSG Precision Cells, Inc. and Starna Cells. Disposable cuvets with 4 mm internal width are available from Fisher Scientific.
D02-1012-313
Permits the reflected color measurement of as little as 0.4 cc of packed powder.
Powder is placed in the powder holder and is backed with the white plunger.
02-7396-00
Used for measuring yarns and string skeins.
B04-1002-672
Tall Transmission Cell, 20 mm, set of three
13-8573-40 (10 mm)
04-4592-00 (20 mm)
B04-1003-801 (33 mm)
13-8573-20 (50 mm)
Optically clear glass cell with fixed path length of 10 mm, 20 mm, or 50 mm. Sample volume 20 mL, 40 mL, and 100 mL respectively. For use with Transmission Spill Tray and Cell Holder. Available with screw tops on special order.
Falcon Tissue Culture Flasks are available from Fisher Scientific and can be used as a disposable cell. The required sample volume is approximately 25 mL. The effective path length is 20 mm. For use with Transmission Spill Tray and Cell Holder.
C02-1005-481
Transmission Cell Holder
Permits transmittance measurement of liquids in Transmission cell.
13-8573-20 (50 mm)
B04-1003-801 (33 mm)
04-4592-00 (20 mm)
13-8573-40 (10 mm)
C02-1005-444
Holds transparent film, glass or plastic in position for total or regular transmission measurement.
CMR2987
Provides consistent placement of a disposable, 10-mm path length (32.5 mm wide), plastic transmission cell on the Transmission Cell Holder (included). Disposable cells can be ordered from Lumelite Plastics as part # 24022642.
D02-1011-550
D02-1011-568
Permits transmittance measurement of liquids using rectangular transmission cell (above). Cells purchased separately.
View a demonstration on how to measure the color difference between a pair of samples and see what the values mean.
UltraScan VIS is a visible-range, high-performance color measurement spectrophotometer that measures the full range of human color perception. It can be used in production and in the laboratory.
...Read more »
The USP and EP Color Standards are visual color standards, intended to improve color communication between sites by defining a sample color as being close to physical liquid standard ("near USP F"; "near EP Y2") rather than using words ("light yellow"). Read Vol. 20, No. 8 (PDF)
