Baking Contrast quantifies lightness of baked crust, crumb and similar applications. Monitoring lot differences in fresh bread and cookies is a typical application but BCU can be applied to monitor browning in any baked product.
HunterLab has instrument and sample handling devices to meet almost any customer needs. One such need that we are able to meet is the measurement of molded plastic parts, such as the one pictured above. These plastic parts are actually covers for a stud finder tool. The nature of these parts presents a few difficulties […]
Often times it can be helpful to change the standardization interval on instruments to correspond with shift changes or other events that might be more convenient. When the instrument reaches the end of this standardization interval it will prompt the user to re-standardize the instrument before moving forward with measurements.
HunterLab manufactures bench top instruments with two different geometry types: directional 45/0 (or 0/45) and diffuse sphere instruments, as discussed in a previous blog note. A 45/0 directional instrument illuminates the sample at a 45˚ angle from the sample surface and the detector is located 0˚ in line perpendicular to the sample surface. The […]
FAQ: “Do we have a method of reading wet paint with a MSEZ-4500L? Short legs etc?” HunterLab has a field-installable, wet specimen port (D02-1014-416) featuring a thin, circular, raised lip to keep the port flush and above the wet layer.
FAQ: “How do I read Opacity on my MiniScan EZ (or ColorFlex EZ) instrument?” To measure opacity you will first need to navigate to the product set up you wish to configure. Once in the product set up you will need to make sure that the standard is set to WORKING. Then navigate to the […]
FAQ: “Is there any way to lock the Product Setups on my MiniScan EZ (or ColorFlex EZ) instrument?” Setups can be locked by navigating to Global Options from the main menu. In the Global Options menu you should see a Setups Locked field. Scroll down to the Setups Locked field and use the right arrow […]
One thing to keep in mind when measuring creams, gels, pastes, and other semi-solid materials is to maintain a consistent sample thickness. One option is to “sandwich” a fixed quanity of your semi-solid material in a suitable clear-bottomed container, so that it can be placed at the port for measurement.
All HunterLab instruments have fuses built into the main circuitry to protect the instrument against unusual and unexpected changes in voltage that could damage the electrical components.
FAQ: “Can I use the EasyMatch QC software to import data from my MiniScan EZ or ColorFlex EZ?”
FAQ: “How do I get data off my MiniScan EZ or ColorFlex EZ if I do not have EasyMatch QC software?”